Key takeaways
- gsm measures fabric weight: 150–180gsm suits most uses, 220gsm+ suits streetwear.
- Combed ringspun cotton is softer, stronger and prints better than open-end cotton.
- Organic claims need GOTS or OCS certificates for the specific order.
- OEKO-TEX STANDARD 100 tests for harmful substances; its 2026 rules took effect on 1 June 2026.
- Garment-dyed and pigment-dyed shirts need their own shrinkage allowance.
Introduction
Two T-shirts can look identical on a hanger and feel completely different on the body. One drapes softly and stays smooth after fifty washes. The other feels stiff, pills under the arms and twists out of shape after a month. The difference is almost always the fabric.
Fabric is also where most of a T-shirt’s cost, comfort and environmental impact sits. Cotton growing accounts for the largest share of the water used across a cotton garment’s life. WWF has estimated that producing the cotton for a single T-shirt can take about 2,700 litres of water. Choosing fabric well is therefore a decision about quality, cost and responsibility at the same time.
This article explains the language of T-shirt fabrics, including fibres, yarns, knits, weights, finishes and certifications, so you can choose with confidence and brief a manufacturer clearly.
Fibres: what the fabric is made of
Cotton
Cotton is the classic T-shirt fibre. It is soft, breathable, absorbs moisture and takes dye and print well. It is ideal for hot, humid climates like Sri Lanka’s, where breathability matters more than quick drying.
Its weaknesses are that it can shrink if not pre-shrunk, wrinkles more than synthetics and dries slowly. Quality varies enormously, depending mainly on fibre length (staple) and how the yarn is spun.
Polyester
Polyester is a synthetic fibre that is strong, light and quick-drying. It resists shrinking and wrinkling and holds bright colours. 100% polyester shirts with moisture-wicking finishes are standard for sportswear and running events.
Its weaknesses are lower breathability, a tendency to hold odours, and the release of microfibres during washing. Polyester also needs suitable print methods. Dye sublimation works only on polyester, while some inks can suffer from dye migration on polyester garments.
Blends
Blends combine the strengths of different fibres:
- Cotton-polyester (for example 60/40 or 50/50): softer than pure polyester, more stable than pure cotton, and less prone to shrinking.
- Tri-blend (cotton, polyester and rayon): very soft, with a draped, slightly vintage look.
- Heather colours: marled shades that usually contain some polyester. Teepig notes that heather colours keep their shape better because of the added polyester.
Other fibres
- Viscose, modal and lyocell: cellulose fibres made from wood pulp, smooth and cool, often blended with cotton for drape.
- Elastane (Spandex or Lycra): added at around 3–5% for stretch in fitted styles.
- Recycled polyester: made from used plastic bottles or textile waste, reducing the need for virgin polyester.
- Linen and hemp blends: textured and very breathable, used in premium summer ranges.
Yarns: how the fibre is spun
The same cotton can make very different fabric depending on how it is spun.
Carded open-end cotton
Open-end (rotor) spinning is fast and economical. The yarn is slightly rougher and hairier. It suits budget and promotional T-shirts, where cost matters more than softness.
Combed cotton
Combing removes short fibres and impurities, leaving longer, aligned fibres. The result is a smoother, stronger yarn with fewer loose ends, which means less pilling and a better print surface.
Ringspun cotton
Ring spinning twists the fibres continuously, producing a finer, stronger and softer yarn. Combed ringspun cotton is the standard for good-quality retail T-shirts. Teepig describes its ringspun premium shirt as less likely to shrink and longer lasting, recommending it for light workwear, gifts and new clothing brands.
Compact spinning
A refinement of ring spinning that reduces hairiness further. It gives an exceptionally smooth surface and is used for premium garments.
Yarn count
Yarn fineness is often stated as a count, such as 20s, 30s or 40s (Ne, the English cotton count). Higher numbers mean finer yarn. A 30s single combed ringspun yarn is a popular choice for quality mid-weight T-shirts, while 20s yarn is used for heavier, more rugged shirts.
Knits: how the yarn becomes fabric
T-shirts use knitted fabrics, which stretch and recover, rather than woven fabrics.
| Knit | Description | Typical use |
|---|---|---|
| Single jersey | Smooth face, looped back, light and flexible | Most T-shirts |
| Interlock | Double-knit, smooth on both sides, thicker and more stable | Premium tees, children’s wear |
| Piqué | Textured honeycomb surface | Polo shirts |
| Rib | Vertical ribs with high stretch | Neck bands, cuffs, fitted tank tops |
| Slub jersey | Uneven yarn gives a textured, natural look | Fashion T-shirts |
| French terry and fleece | Looped or brushed back | Sweatshirts and hoodies |
Single jersey has one known weakness: spirality, or twisting. If the fabric is not properly stabilised, side seams can twist towards the front after washing. Good fabric finishing and correct cutting along the grain prevent this.
Weight: understanding gsm
Fabric weight is measured in grams per square metre (gsm). In the US, it is often given in ounces per square yard (oz/yd²). To convert, multiply ounces by about 33.9. So a 5.3 oz shirt is roughly 180gsm.
A higher gsm means a thicker, more substantial fabric. As a guide:
| Weight | Feel | Best for |
|---|---|---|
| 120–145gsm | Light, soft and airy | Hot climates, fashion layering, budget promotions |
| 150–170gsm | Everyday mid-weight | Most retail, event and staff T-shirts |
| 180–200gsm | Substantial and durable | Workwear, premium retail, embroidery |
| 220–300gsm | Heavyweight and structured | Streetwear, oversized and boxy fits |
Teepig’s range illustrates this scale. Its organic shirt is about 145gsm, light enough for warm days, its everyday shirt about 150gsm and its ringspun premium shirt about 180gsm.
Weight is not the same as quality. A 150gsm combed ringspun fabric can outperform a 180gsm carded open-end fabric in softness, print quality and durability. Always ask about the yarn as well as the gsm.
Weight also affects decoration. Teepig advises choosing a heavier garment for large, solid prints, because a solid print on a 150gsm shirt can feel stiff. Embroidery also sits better on heavier fabrics, which do not pucker as easily.
Fabric finishes
Fabric is usually finished after knitting and dyeing. Common finishes include:
- Pre-shrinking (compacting): the fabric is mechanically compacted to reduce shrinkage in the garment.
- Enzyme or bio-washing: removes surface fibres for a smoother, softer feel and less pilling.
- Silicone softening: adds a silky hand feel.
- Garment dyeing: whole garments are dyed after sewing, giving a soft, lived-in look with slight colour variation.
- Moisture-wicking finishes: help sports fabrics move sweat away from the skin.
- Antimicrobial finishes: reduce odour in sportswear and uniforms. Check the chemistry, because some finishes are restricted in certain markets.
Garment dyeing and pigment dyeing
Some T-shirts are dyed after they are sewn, rather than as fabric. Garment dyeing gives a soft, lived-in feel and slight colour variation that many fashion brands want. Laundry chemical catalogues show the steps involved: a pre-wash, dyeing with reactive or direct dyes using levelling agents for an even colour, soaping to remove unfixed dye, and an after-treatment to improve wash fastness. Crease-prevention agents stop marks forming while garments tumble in the dye bath.
Pigment dyeing is another option. The garment is first given a cationic pre-treatment so that pigments are attracted to the cotton, then dyed and fixed with a soft binder, often at around 90–100°C in a drum dryer. The result is a washed-out, vintage colour that fades gently with every wash. Because the pigment sits on the surface, pigment-dyed shirts should be washed cold and inside out.
Garment-dyed and pigment-dyed T-shirts need their own shrinkage allowance, because the garment shrinks in the dye bath. Sampling and wash testing are essential.
Colour and dyeing
Cotton is usually dyed with reactive dyes, which bond chemically with the fibre and give good wash fastness. Polyester is dyed with disperse dyes at high temperatures. Blends may need both.
Points to discuss with your manufacturer:
- Colour reference: use Pantone TCX (textile) references rather than screen colours.
- Lab dips: small dyed swatches you approve before bulk dyeing.
- Colour fastness: how well the colour resists washing, rubbing and light, measured by ISO 105 test methods.
- Dye lot variation: large orders should be dyed and cut in as few lots as possible.
White, black and core colours are usually cheaper and faster, because fabric is often available in stock. Teepig notes that white is the cheapest colour to print.
Organic cotton
What it means
Organic cotton is grown without synthetic pesticides and fertilisers, and from non-genetically modified seed. Farmers use crop rotation, natural pest control and composting to keep soil healthy.
Supporters point to lower chemical use, healthier soils and safer conditions for farm workers. Organic cotton remains a small share of world cotton production, so supply chains need careful verification.
Certifications that matter
Organic claims should be backed by recognised certification:
- GOTS (Global Organic Textile Standard): covers the whole chain from fibre to finished garment, including environmental and social criteria. A product labelled “organic” under GOTS must contain at least 95% certified organic fibre, and “made with organic” products at least 70%. Seller guides report that GOTS version 8.0 was released in 2026 with stronger due-diligence requirements.
- OCS (Organic Content Standard): verifies the amount of organic material in a product, but does not cover processing chemicals or social criteria.
- OEKO-TEX STANDARD 100: not an organic standard. It tests finished textiles for harmful substances. OEKO-TEX’s 2026 regulations came into force on 1 June 2026, adding more PFAS substances to the test scope with lower limits.
Is organic always better?
Organic cotton is a strong choice for brands that want a clear environmental story. But no fabric is perfect. Organic cotton can have lower yields and still needs significant water. The most sustainable T-shirt is often simply the one that lasts longest and is worn most. That means good yarn, correct weight, proper pre-shrinking and durable decoration.
Other responsible options include recycled cotton (often blended with other fibres for strength), recycled polyester, and cotton from programmes such as Better Cotton. Each has trade-offs, and each claim should be supported by documentation.
Choosing fabric for your use
| Use | Suggested fabric |
|---|---|
| One-day event or giveaway | 140–160gsm cotton or cotton-poly blend |
| Retail fashion T-shirt | 160–200gsm combed ringspun cotton |
| Streetwear or oversized fit | 220–280gsm heavyweight cotton |
| Staff uniform in a hot climate | 160–180gsm combed cotton or cotton-poly for shape retention |
| Running or sports event | 100% polyester performance fabric |
| Eco-focused brand | GOTS-certified organic cotton, 150–180gsm |
| Polo shirt | Cotton or cotton-poly piqué, 200–220gsm |
Testing fabric before you commit
Before approving bulk fabric, ask for or carry out these checks:
- Weight test: a circular cutter removes a 100cm² sample, which is weighed to confirm gsm.
- Shrinkage test: wash and dry samples, then measure length and width change.
- Spirality test: check side-seam twist after washing.
- Colour fastness: wash with a white fabric and check for staining.
- Pilling test: rub the fabric surface and check for bobbles.
- Hand feel: compare against an approved reference swatch.
Fabric for Sri Lanka's climate
Sri Lanka’s coastal cities are hot and humid for most of the year, and the hill country is cooler and damp. That has practical consequences for T-shirt fabric choice.
- Breathability comes first. In Colombo’s humidity, a light or mid-weight cotton jersey (around 150–180gsm) feels far more comfortable than a heavy 240gsm shirt or a non-wicking polyester.
- Sweat marks matter. Light grey and some pastel shades show sweat clearly. For outdoor staff, darker colours, heather blends or patterned fabrics hide it better.
- Fading in strong sun. Reactive-dyed cotton with good light fastness keeps its colour longer. Ask for light fastness results if shirts will be worn outdoors every day.
- Drying indoors. In the monsoon, shirts are often dried indoors and slowly. Cotton-polyester blends dry faster and smell fresher than heavy cotton.
- The UAE is different. In the Gulf, people move between very hot outdoor heat and air-conditioned interiors. Mid-weight combed cotton, or cotton with a little polyester, works well for staff who do both.
A shirt that suits a London autumn may be uncomfortable in a Galle afternoon. Dsigngo’s advice always starts with where and how the shirt will be worn.
How fabric affects decoration
Fabric choice and decoration method are linked. Choosing them together avoids disappointing results.
- Screen printing: works best on smooth, tightly knitted cotton. Plastisol inks sit on top of the fabric and suit most colours. Water-based and discharge inks soak into the fibre and give a soft feel, but only work well on natural fibres and need careful testing on blends.
- DTF transfers: stick to cotton, polyester and many blends, which makes them flexible for mixed fabric orders.
- DTG (direct to garment): gives its best results on 100% cotton, because the water-based inks bond with cotton fibres.
- Sublimation: works only on polyester or high-polyester fabrics in white or light colours, because the dye turns into a gas and bonds with the polyester.
- Embroidery: needs stable fabric. Very light jersey can pucker, so a backing (stabiliser) is used, and heavier fabrics or piqué give the cleanest results.
If you are unsure, ask for a printed or embroidered test piece on the exact fabric before approving the bulk order. Screen Printing, DTF, DTG, Embroidery and More: T-Shirt Decoration Methods Compared compares decoration methods in more detail.
Common fabric defects to look for
Even good fabric can arrive with faults. Knowing them helps you check samples and bulk deliveries:
- Barre: faint horizontal stripes caused by uneven yarn or tension during knitting. It often shows only after dyeing.
- Holes and drop stitches: small holes or ladders caused by broken needles or yarn.
- Shade variation: differences in colour between rolls, or between the edge and centre of one roll.
- Spirality: twisted fabric that makes side seams move after washing.
- Pilling: small balls of fibre that form on the surface with wear, more common on open-end yarns and some blends.
- Neps and slubs: small knots or thick places in the yarn. These are acceptable in slub fabrics, which use them deliberately, but are faults in smooth jersey.
- Oil and stains: marks from machines that must be removed or cut around.
In a properly run factory, these are caught at fabric inspection, before cutting begins. That is why fabric inspection is the first of Dsigngo’s five quality gates.
Reading a fabric specification
When a manufacturer quotes for your T-shirts, the fabric line on the quote should tell you exactly what you are buying. A complete fabric specification looks like this:
100% cotton, 30s combed compact ringspun, single jersey, 180gsm ± 5%, reactive dyed, enzyme washed, pre-shrunk, shrinkage within 5%
If a quote simply says “cotton T-shirt, 180gsm”, ask for the missing details: yarn type, knit, dyeing method, finish and shrinkage tolerance. Two quotes that look different in price may simply be describing different fabrics. Comparing full specifications is the only fair way to compare prices.
An example in practice
The following example is illustrative and does not describe a real client.
A Sri Lankan yoga studio wants to launch a small clothing range. Its first instinct is a 220gsm heavyweight tee, because it feels premium in the hand. But the shirts will be worn in a warm studio. After testing samples, the studio chooses a 160gsm GOTS-certified organic cotton jersey with 5% elastane for its fitted women’s style, and a 170gsm organic jersey for its relaxed unisex style. The prints use water-based inks that keep the fabric breathable.
How Dsigngo Group helps
Dsigngo Group helps clients choose fabric based on use, climate, budget and brand story. We can provide swatches and samples, compare options side by side and arrange testing before bulk orders. The same approach goes into Duiker, Dsigngo’s own clothing brand.
Frequently asked questions
What is the best gsm for a T-shirt?
For most uses, 160–180gsm is a good balance of comfort and durability. Lighter weights suit hot weather and layering, while heavier weights suit streetwear and workwear.
Is ringspun cotton worth it?
Yes, for any shirt meant to last or to be sold. It is softer, stronger and prints better than open-end cotton.
Does 100% cotton shrink?
It can, unless the fabric is pre-shrunk. Choose compacted or pre-shrunk fabric and wash at 30°C. Teepig advises washing at 30°C or lower and avoiding the tumble dryer.
How do I know a shirt is really organic?
Ask for a GOTS or OCS transaction certificate for the specific order, not just a general company certificate.
Which fabric is best for printing?
Smooth, combed ringspun cotton gives the sharpest prints. Polyester needs suitable inks or sublimation.
Conclusion
Fabric is the foundation of every T-shirt. Understand fibres, yarns, knits and gsm, ask for testing, and treat organic or sustainable claims with healthy scepticism until they are certified. The right fabric makes a T-shirt feel good, print well and last, which matters to customers, staff and the planet.
Need help choosing a T-shirt fabric? Ask Dsigngo Group for swatches and advice.
Related reading
- Custom T-Shirt Manufacturing: A Complete Guide from Idea to Delivery
- Screen Printing, DTF, DTG, Embroidery and More: T-Shirt Decoration Methods Compared
- How to Prepare Artwork for T-Shirt Printing: Files, Resolution, Colours and Placement
- T-Shirt Fits and Sizing: How to Get the Size Right and Keep It That Way
- Corporate, Event and Team T-Shirts and Polos: A Buyer's Guide to Bulk Orders
- How Denim Jeans Are Made: From Cotton Field to Finished Pair
Sources
- Teepig, "Which t-shirt?" guide and design guidelines: https://www.teepig.co.uk/help/which-t-shirt/ and https://www.teepig.co.uk/help/design-guidelines/
- WWF, water use in cotton production (about 2,700 litres for one cotton T-shirt).
- Global Organic Textile Standard: https://global-standard.org
- OEKO-TEX, New regulations 2026 for STANDARD 100: https://www.oeko-tex.com/en/news/infocenter/oeko-tex-new-regulations-2026
- ISO 105 series, textile colour fastness tests.
- Garment laundry and dyehouse chemical catalogue supplied by Dsigngo Group (internal reference, not for publication).











