Introduction
Walk down the biscuit, bakery or confectionery aisle of any supermarket, and most packs you see were made by two kinds of machine. Flow wrappers create the familiar pillow packs around biscuits, chocolate bars, cakes and buns. Cartoners place wrapped products, sachets, bottles or blister packs into printed boxes. The same machines are used for soap, medical supplies, tea bags, cosmetics and household goods.
For manufacturers, flow wrapping and cartoning are often the first steps towards automation, because they replace slow, repetitive manual wrapping and boxing with consistent, high-speed production. This article explains how these machines work, what to consider when choosing them, and how to combine them with weighing, inspection and conveying equipment into an efficient line.
Horizontal flow wrappers
How they work
A flow wrapper, also called a horizontal form fill seal (HFFS) machine, works like this:
- Products are placed on an infeed conveyor, either by hand or automatically.
- Film from a roll is formed into a tube around the products.
- A longitudinal seal is made along the bottom or top of the tube by heated fin wheels.
- Rotating cross-sealing jaws seal and cut the film between products, creating individual pillow packs.
- Finished packs leave on a discharge conveyor.
Film direction
Most flow wrappers feed film from above (the seal is underneath), which suits most products. Some models feed film from below, which is useful for products that are hard to push, such as soft or irregular items, and for products with crumbs or rough edges, such as biscuits.
Servo control
Modern flow wrappers use servo motors to control conveyor, film and jaw movements. Servo control brings:
- More stable speeds and consistent pack length.
- Better seal quality.
- Easier adjustment through a touch screen.
- Less waste during start-up and changeovers.
Typical specifications
The flow wrapper range Dsigngo Group supplies includes nine models, for example:
- UN300ZS Plus servo flow wrapper: bag length 170 to 400 mm (single cutter), product width 35 to 100 mm, height up to 60 mm, 30 to 140 packs per minute with one cutter, rising to around 290 with two cutters and 350 with three. It can join new and old film rolls without stopping.
- 280ZS flow wrapper: a compact model for smaller products.
- 630ZS and 800QZS series: for larger products such as bread, cakes and multipacks.
- 1200ZS and 1600ZS series: high-speed models for confectionery, reaching up to 1,600 pieces per minute for candy.
Products suited to flow wrapping
- Biscuits, cookies and crackers.
- Chocolate bars and wafers.
- Cakes, buns, bread and rusks.
- Ice lollies and frozen products.
- Soap bars, sponges and household goods.
- Medical supplies such as syringes and masks.
- Fresh produce in trays.
- Cards, stationery and small hardware.
Film requirements
Flow wrappers use printed laminated films such as BOPP, metallised films or cold-seal films for heat-sensitive products like chocolate. Key requirements include:
- Correct film width for the product size.
- Accurate eye marks for print registration.
- Suitable sealing layers for the sealing temperature.
- Consistent roll quality.
Feeding options
Products can be loaded manually onto the infeed chain, or fed automatically from production lines using conveyors, aligners and pick-and-place systems. Automatic feeding increases speed and reduces handling, which is important for hygiene.
Cartoning machines
How they work
An automatic cartoner:
- Takes a flat carton blank from a magazine.
- Opens and squares the carton.
- Inserts the product, often with a leaflet.
- Closes the carton by tucking flaps or applying glue.
- Codes the carton with a date or batch number, if required.
- Discharges the finished carton.
Horizontal and vertical cartoners
- **Horizontal cartoners** push products sideways into cartons. They suit blister packs, tubes, bottles, sachets, bars and bundled products.
- **Vertical cartoners** drop products into cartons from above. They suit loose items, pouches and products that are easier to load from the top.
Glue or tuck closure
- Tuck-in flaps are simple and allow cartons to be opened and reclosed.
- Hot-melt glue creates tamper-evident, secure closures for retail products.
Typical specifications
The cartoner range includes six models, for example:
- 120LZH automatic vertical cartoner: 20 to 50 cartons per minute, carton sizes from 40 × 30 × 50 mm to 120 × 120 × 300 mm.
- 100DZH and 130DZH horizontal cartoners: 30 to 120 cartons per minute.
- 100GZH automatic cartoner: 80 to 150 cartons per minute.
- 200GZH automatic cartoner: 80 to 100 cartons per minute for larger cartons.
Carton board of around 250 to 350 g/m² is typical.
Products suited to cartoning
- Pharmaceuticals: blister packs, tubes and bottles with leaflets.
- Tea bags and coffee sachets.
- Biscuits and confectionery multipacks.
- Cosmetics and personal care products.
- Spices and food sachets.
- Household products.
Carton requirements
Cartoners need consistent cartons:
- Accurate dimensions and creasing.
- Suitable board stiffness.
- Correct glue flaps and pre-folding.
- Flat, well-stored blanks without warping.
Dsigngo Group’s offset printing and packaging teams can produce cartons designed to run on your cartoner, which helps reduce jams and stoppages.
Building an integrated line
Flow wrappers and cartoners are often combined with other equipment:
- Production output: products arrive from ovens, moulding or cutting.
- Conveying and aligning: products are spaced and oriented.
- Flow wrapping: individual packs are made.
- Check weighing: packs outside weight limits are rejected.
- Metal detection: contaminated packs are rejected.
- Cartoning: packs are grouped into retail cartons.
- Case packing: cartons are packed into shipping cases.
Each machine must match the line speed. Buffers between machines absorb short stoppages, and communication between machines prevents overflows.
Bundling and multipacks
Retailers and consumers increasingly buy multipacks: several flow-wrapped biscuits in an outer wrap, bars bundled in a carton or sachets grouped in a pouch. Multipacks can be created by:
- Flow wrapping groups of individually wrapped products in a larger outer wrap.
- Cartoning several packs together.
- Shrink wrapping bundles with a thermal shrink packer.
Multipacks add value for retailers and consumers, but they require careful planning of product grouping, infeed and pack sizes. A flow wrapper with an adjustable infeed can often handle both single packs and multipacks, giving manufacturers flexibility as their range grows and retailers ask for new pack formats.
Check weighers and metal detectors
End-of-line inspection protects consumers and brands:
- Check weighers weigh every pack and reject those outside set limits, ensuring compliance with weight laws and reducing giveaway. The check weigher in the range uses digital signal processing and stores inspection data.
- Metal detectors detect metal contamination and reject affected packs. The metal detector in the range has a 400 mm belt, product widths up to 460 mm and belt speeds of 10 to 50 metres per minute.
Our blog article on keeping packaging machines food-safe explains inspection practices in detail.
Conveyors
Conveyors connect machines and move products smoothly:
- Z-type and L-type conveyors lift product to weighers and fillers.
- Bucket and bowl conveyors move fragile or free-flowing products.
- Auger conveyors move powders.
- Vacuum conveyors transfer powders in closed systems, reducing dust.
Changeovers
Many factories run several products on the same line. Fast changeovers keep productivity high:
- Recipe memory on touch screens.
- Quick-change parts with clear markings.
- Adjustable guides and formers.
- Trained operators following standard procedures.
Measuring changeover time and improving it step by step can significantly increase available production time.
Packaging design for machine performance
Packaging that looks good on shelf must also run well on the machine. Close cooperation between packaging designers, printers and machinery teams avoids many problems.
For flow wrap films
- Eye marks: clear, high-contrast registration marks positioned correctly, so the machine cuts each pack in the right place.
- Repeat length: the printed design must match the pack length set on the machine.
- Seal areas: keep important text and images away from fin and end seals.
- Ink and varnish: inks in seal areas must not interfere with sealing.
- Film structure: choose laminates suited to the product, barrier needs and sealing temperatures.
For cartons
- Dimensional accuracy: carton sizes must stay within tight tolerances.
- Crease quality: clean creases help cartons open and fold reliably.
- Glue areas: keep glue flaps free of varnish where hot-melt glue is used.
- Grain direction: board grain affects how cartons open and stand.
- Barcodes and coding areas: leave clear areas for date and batch coding.
Dsigngo Group’s ability to design packaging, print cartons and supply machines under one roof helps align these details from the start.
Hygiene and safety in wrapping and cartoning
Flow wrappers and cartoners must meet hygiene and safety expectations:
- Hygiene: product contact areas should be easy to clean, with stainless steel or food-safe materials where food contacts the machine. Crumbs and debris should be easy to remove.
- Guarding: sealing jaws, knives and moving parts must be guarded, with interlocked doors that stop the machine when opened.
- Emergency stops: clearly marked and easy to reach.
- Heat: sealing elements operate at high temperatures, so operators must be trained in safe handling.
- Noise: some machines produce noise that may require hearing protection.
International standards for machinery safety, such as ISO 12100 on risk assessment, provide useful guidance when evaluating machines.
Measuring line performance
Many manufacturers measure line performance using overall equipment effectiveness (OEE), which combines:
- Availability: the percentage of planned time the line actually runs.
- Performance: the actual speed compared with the ideal speed.
- Quality: the percentage of good packs produced.
Tracking OEE helps identify where time is lost, whether through breakdowns, slow running, changeovers or rejected packs. Small improvements in each area add up to significant gains in output without buying new machines. Modern machines with production counters and fault logs make this measurement easier.
Planning space and layout
Flow wrappers and cartoners can be long machines, especially with infeed and discharge conveyors. When planning layout:
- Measure the complete line length, including conveyors and buffers.
- Allow space on both sides for operators, maintenance and cleaning.
- Plan routes for film rolls, carton blanks and finished goods.
- Position electrical supply and compressed air points.
- Consider future expansion, such as adding a second wrapper or a case packer.
A simple scale drawing of the factory floor, with each machine and its access areas, is an essential planning tool.
Choosing the right machines
Consider:
- Product size, shape and fragility.
- Pack style and materials.
- Required speed now and in future.
- Number of products and changeovers.
- **Feeding method: manual or automatic.**
- Space and layout.
- Integration with existing equipment.
- Budget and payback.
Flow wrapping for different industries
Bakery
Bread, buns, cakes and rusks vary in size and softness. Flow wrappers for bakery often need gentle infeed, adjustable pack height and sometimes gas flushing to extend freshness. Products should be fully cooled before wrapping to prevent condensation inside the pack.
Biscuits
Biscuits may be wrapped as single portions, stacks or slugs. Stacks require careful infeed and film that handles crumbs and rough edges. Bottom-film machines can help with these products.
Confectionery
Chocolate and sweets often need cold-seal films to avoid heat damage, and high-speed machines for small items. Hygiene and temperature control in the packing room are important.
Pharmaceuticals and medical supplies
Medical products need clean, consistent packs with batch and expiry coding, and often cartoning with leaflets. Documentation and traceability are essential.
Household goods
Soap, sponges and cleaning products are often flow-wrapped for protection and branding, then cartoned or bundled for retail.
Coding and traceability
Every retail pack typically needs a date and batch code. Options include:
- Thermal transfer printers: print sharp codes onto film before it is formed, ideal for flow wrappers and VFFS machines.
- Inkjet printers: print onto cartons, films and other surfaces.
- Hot stamp coders: simple, economical coders for basic codes.
Codes must be legible, correctly positioned and checked regularly. For exporters and pharmaceutical producers, traceability systems may require more detailed codes and records.
Budgeting for a wrapping and cartoning line
Costs include more than the machines themselves:
- The flow wrapper and cartoner.
- Infeed and transfer conveyors.
- Check weigher and metal detector.
- Date coders.
- Installation, commissioning and training.
- Change parts for different products.
- Spare parts and wear parts.
- Film and carton trials.
- Factory preparation, including power and compressed air.
Phasing investment is common. Many manufacturers start with a flow wrapper and manual boxing, then add a cartoner when volumes justify it. Planning the layout for the complete line from the beginning makes later additions much easier and avoids moving machines twice.
Training operators
Flow wrappers and cartoners are straightforward to operate when staff are well trained. Training should cover:
- Starting up and shutting down safely.
- Loading film rolls and carton blanks.
- Adjusting pack length, sealing temperatures and speeds.
- Clearing jams safely.
- Changeover procedures.
- Daily cleaning and inspection.
- Recognising common faults and when to call maintenance.
Simple visual guides at each machine, with photos of correct settings and good packs, help maintain standards across shifts.
Common mistakes
- Choosing a flow wrapper too small for future product sizes.
- Poor film quality or registration marks causing stoppages.
- Cartons that are not machine-ready.
- No buffer between flow wrapper and cartoner.
- Skipping check weighing and metal detection, which protect both consumers and the brand.
- Underestimating changeover time.
Illustrative example
The following example is illustrative and does not describe a real client.
A Sri Lankan biscuit maker wraps biscuits by hand into small packs and boxes them manually. Output cannot keep up with supermarket demand, and pack appearance varies.
A servo flow wrapper is installed after the cooling conveyor, wrapping stacks of biscuits in printed film. A check weigher and metal detector follow, and a horizontal cartoner packs ten flow-wrapped packs into each retail carton. The biscuit maker’s packaging team redesigns the film and cartons for machine running. Output increases, packs look consistent and fewer people are needed for repetitive wrapping, allowing staff to move to quality control and dispatch.
How Dsigngo Group can help
Dsigngo Group supplies flow wrappers, cartoners, check weighers, metal detectors and conveyors, with trials, installation, training and support. Our design and printing teams create films and cartons that run smoothly on your machines and stand out on the shelf.
Frequently asked questions
What is the difference between a flow wrapper and a VFFS machine?
A flow wrapper packs solid products moving horizontally into pillow packs. A VFFS machine forms bags vertically and fills them from above, usually with loose products.
Can a flow wrapper pack different product sizes?
Yes, within its range, by adjusting settings and, sometimes, changing formers.
Do cartoners insert leaflets?
Many cartoners can insert leaflets, which is important for pharmaceuticals.
How fast are flow wrappers?
From around 30 packs per minute for larger products to over 1,000 pieces per minute for small confectionery on high-speed models.
Can you supply printed films and cartons?
Yes. Dsigngo Group designs and prints packaging, including cartons for cartoners.
Conclusion
Flow wrappers and cartoners transform manual wrapping and boxing into fast, consistent, hygienic processes. Combined with conveyors, check weighers and metal detectors, they form efficient lines for biscuits, bakery, confectionery, pharmaceuticals and household products.
Dsigngo Group helps manufacturers choose, install and support flow wrapping and cartoning solutions.
Ready to automate wrapping and boxing? Talk to Dsigngo Group.
Sources
- Machine specifications from the machine catalogue supplied by Dsigngo Group.











